Models GT-150 and GT-150 for Rig Mounting

STANDARD FEATURES:

AXLES: Rockwell 13,000 lb. axles, rigid mounted to frame.*
For rig mounting: 14,000 lb. axles, rigid mounted to frame.*

BRAKES: Four-wheel hydraulic drum brakes with hand-operated park brake mounted at front lower end of transfer case with positive lock handle.
For rig mounting: Foot-operated drum brakes mounted at wheel end of axles and hand-operated park brake in driveline.

STEERING: Hydraulic dual cylinder articulated center pivot steering with plus/minus 37 degree articulation.

TRANSFER CASE: Rockwell model T-32 special design for four-wheel drive.
For Rig Mounting: Rockwell Model T-32 special design for 4-wheel drive with direct drive power-take-off for drill operation.

OSCILLATION: Plus/minus 20 degree between front and rear frames.

ENGINE: Cummins 4BT3.9 four-cylinder diesel, rated 100 HP continuous @ 2500 RPM; 260 ft. lbs. of torque @ 1700 RPM.
For rig mounting: Cummins 4BT5.9 four-cylinder diesel, rated 100 HP continuous @ 2500 RPM; 2600 ft. lbs. of torque @ 1700 RPM.

GEAR TRAIN: Eaton Fuller FS-4005-A transmission, five speeds forward, one speed reverse, with 13 inch heavy-duty clutch.
For rig mounting: Eaton Fuller FS-4205A transmission, five speeds forward, one reverse with 13" heavy-duty clutch (eight speeds forward and two speeds reverse with use of dual range transfer case), driveshaft to be 2-1/2" outside diameter steel tubing, Spicer #1350 universal joints.

ELECTRICAL SYSTEM: 12-volt with 78 amphere hour battery, alternator.

INSTRUMENTS: Ammeter, key ignition, high temperature and low oil pressure shut-down system, electric tachometer and hourmeter, and back-up warning alarm.
For rig mounting: also water temperature gauge and oil pressure gauge.

FUEL TANK: 38-Gallon.

TIRES AND WHEELS: Set of four (4) 48 x 25.00-20 6-ply tires mounted on steel wheels.
For rig mounting: Set of four (4) 48 x 25.00-20 6-ply tires mounted on H-D bead lock rims.

CAB: One-man open cab with certified Roll-Over-Protection Structure, grab handles on both sides of cab.
For rig mounting: ARDCO standard brushguard and overhead canopy with certified Roll-Over-Protection Structure.

PAINT: Customer choice of one color, enamel.

ACCESSORIES: Raycor fuel filter/separator, retractable seat belts, bell pay protection, dry-type precleaner.*
For rig mounting: Heavy-duty rear frame for drill rig mounting, seat belts, belly pan protection, Raycor fuel filter/separator.*

*OPTIONAL FEATURES:

  • Detroit Automotive No-Spin in front axle.
  • Front and rear sealed beam work lights.
  • Front two hooks.
  • 10-Gallon portable water tank with spring handle.
  • For rig mounting: Ramsey 700-L Series (15,000 lb.) with 100 ft. of 5/8" cable, hook, tail chain, and roller assembly; single speed; forward and reverse transmission; mounted power-take-off; and complete winch installation.

AVAILABLE MOUNTINGS:

 GEOPHYSICAL
 UTILITIES
 Dynamite Box  Personnel Carrier
 Geophone Bed  Utility Bed
 Personnel Carrier  Water Tank
 Utility Bed  A-Frame
 Water Tank  Rotary Ditcher
 Small Drills  Backhoe
   Fuel Tank
   Aerial Bucket